014-1060-030 - Follower plate for pumps with shank 30 mm subgroup-Drukvaten in AISI 304 of AISI 316 to food and drink products

to food and drink products can be pumped

and 5-YEARS on the pump

All the parts can be substituted without opening those parts of the body that are in contact with the fluid

automatically

This operation can be effected also for aspiration

014-1060-030 - Follower plate for pumps with shank 30 mm subgroup-Drukvaten in AISI 304 of AISI 316 to food and drink productsIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.